blue

Since I have been exiled to life indoors while my face heals up, I’ve decided to put the time to good use and work on finishing our Sunbrella transformation. So far we’ve replaced the sail cover, the bimini, and all of the small canvas items on the boat with new marine blue Sunbrella. Only the jib Sunbrella and the dodger remain a moldy pacific blue.

13613557_10206755634517798_2630705517226618583_o

Sailrite has an excellent video describing the step-by-step process of adding sunbrella to your jib, but I wanted to add some little tricks I found along the way as well.

The first thing we did was spend several DAYS, not hours, removing the old sunbrella. After breaking my seam ripper I got frustrated and googled “best seam ripper ever.” This is when I learned that for ripping seams on heavy canvas an X-Acto knife works wonders. This really sped up the process for us.

Once I had removed all the old Sunbrella, I started to cut the new panels of Sunbrella with a hot knife to prevent fraying. I didn’t want to spend the extra money on the Sailrite hot knife, but I found this one at Hobby Lobby that worked very well. It also doubles as a wood and leather burner, and it has all kinds of stamp type attachments. Pretty cool. After using my coupon, it was only $13.

SailRepair01

If you’re installing panels onto a new sail, see the Sailrite video for exact measurements of panels, but if you’re re-covering a sail, it’s easier to use the old panels as a pattern.

SailRepair02

We set my sewing machine on the floor to keep the sail flat. This is really important when it comes to connecting the panels together. There were a couple areas along the foot, where towards the end of the project I got tired and sloppy. Just a small mistake can make for some very obvious bunching when the sail is up. Next weekend I will be taking it all back down, seem ripping those seems and flattening it out.

If I was to do it again I would have done a lot more pinning.

All in all the finished product is not too bad. It needs a bit of adjusting, like all of my projects so far, but at least it matches the rest of the canvas.

SailRepair03

Just for reference, the estimated cost for this project from one of our local sail lofts was $650. Although we did have to spend every evening for a week ripping stitches, our total out-of-pocket cost for the project was under $200.

We had one Saturday scheduled in Florida, so we decided to spend it exploring St. Joseph Peninsula State Park, which is consistently rated one of the best beaches in not only Florida, but the nation. Much more sunscreen was applied.

The park is at the end of the St. Joe peninsula and has the larger gulf waves lapping on the west side, and the calm clear waters of St Joseph Bay on the east. The drive from St Joe was around 35 minutes. According to their site, the state park boasts 9.5 miles of “snow-white” sand beaches and “aqua-blue” waters.

Entry to the park was a mere $6 per vehicle, but there are no dogs allowed, so our new friend Turtle had to stay home and catch up on his reading.

The park also has 119 campsites for those that want to hang out longer for some serious fishing, kayaking or SUP.

The gulf had more beach, bigger waves and got deep quickly, which made swimming much more fun that it was at Salinas Park. Everyone spent lots of time in the water, which was also more clear than the water at Salinas Park, but still not quite clear enough to get a good underwater selfie.

As we sat and stared out into the blue, I kept seeing something move out of the corner of my eye. I finally grabbed the camera and stared at a couple of holes in the sand for the better part of 5 minutes. Then I finally saw this little guy flicking sand around cleaning out his burrow.

These things are called ghost crabs, and once I saw the first crab, I started noticing them all over the beach. They’re pretty shy, but if you sit quietly for a few minutes, they’ll pop up to say, hello.

After several hours of playing in the surf, we began digging around and playing in the sand. There is something about pointless, mindless physical labor that is so relaxing. So naturally after digging what was a pretty impressive sand hole, we decided to bury two people in it, and make them into mermaids.

After quite a bit more goofing off we decided to wander over and check out the bay. The water on this side was shallow for hundreds of feet out and totally clear. However, if you plan to venture into it, I highly recommend wearing shoes of some sort because it was teaming with crabs and spiky anemones.

After exploring the area, we grabbed an empty shell and walked back to our chairs. As we packed up the car, we got a surprise when a crab made an appearance from the “empty” shell, demanding we put him (or her) back into the bay. We set the crab free and headed back to Port St. Joe.