The difference a dink makes

The wind was a steady 25 knots, gusting over 30, blowing straight off the shore of the small island behind which we were anchored. Both of our dogs, whom refuse to to soil our boat (at least while we’re there) hadn’t relieved themselves in more than 24 hours and looked absolutely miserable.

dink10

I held tight to the standing rigging as I stood on the cabin top and looked over my small kayak trying to decide if I could even make any headway towards the island or if I’d be blown back past the boat and out into the middle of the bay if I attempted the trip to shore.

It wasn’t so much that I was worried about what would happen to me and two dogs in life jackets on a kayak — we’d just be carried ashore somewhere in San Leon. The problem was that if I couldn’t get back to the sailboat, Mary would be stranded there, unable to lift the anchor and leave.

That was the weekend we really began dinghy shopping.

But what type and size of a dinghy did we need and how would we power it?

dinkgif02

Luckily we had many boating friends also looking for dinghies, so we waited and learned from their experiences.

Our friends on the Tina Marie Too had a big double floor West Marine inflatable with a 20hp 4-stroke engine. It was comfortable. It planed up. It held a lot of people. It was way too big for our boat. We ruled out a fiberglass floor inflatable.

Our friends on Escondida had an 8′ slat floor inflatable with a 5 hp. It was small, light and could easily be lifted on and off the foredeck. It could also be rolled up and stowed in the cabin. It didn’t hold much, and it was very slow.

Our friends on Folie a Deux bought a Port-a-bote. It wasn’t too heavy, and it folded flat to tie against the lifelines. However, it was only rated for a 2.5 hp motor, and they got caught with a strong headwind in Matagorda Bay and couldn’t make any forward progress.

What we really thought we wanted was a Takacat. However, actual Takacat inflatables are quite expensive, so we started looking at the generic Saturn inflatable catamarans available. Our friends on Hippokampos got curious about them as well and bought one.

dink07.jpg

Not tapering together at the bow makes for a very wide dinghy. In fact, we referred to it as the barge. It was sort of a strange ride because you could feel the flex in the middle when a wave raised one pontoon and then the other. They’ve been cruising with it for over a year now, and you can actually read their entire review of it here. While they had no major complaints, we realized there was no way we could put a boat that wide on our foredeck, and we weren’t sure we’d even have the space to inflate and deflate it anywhere on Gimme Shelter.

dink08

We went back to thinking we would go with an 8′ slat floor roll-up with a 5hp Lehr propane engine. While small and slow, that seemed to be the best option for our 34′ sailboat. We also wouldn’t have to carry gasoline along with the diesel and propane we were already carrying. We started saving and kept waiting for the big sale at West Marine.

However, sometimes the right dinghy finds you.

dink02

Our friends over at SVMimzy.com asked if we were interested in a 10′ AB rigid floor inflatable with a Mercury 9.9 hp 2-stroke. While it was about ten years old, it was in really nice shape. I just didn’t think we could lift it or that we’d have space for it on the boat. I was incredibly surprised when the boat only weighed around 100 pounds, and I could pick it up and move it around myself — and it just barely fit on our foredeck. I have to lift it up and bit to open and close the anchor locker, but it works.

dinkgif03.gif

We’ve anchored out more times this year than in almost all of our past years of sailing combined thanks to being able to easily get the dogs back and forth to shore.

dink01

Of course, it’s been useful for more than just carting dogs around. Mary and I have made runs up and down the ICW from Bolivar to Stingarees.

dinkgif01

We can finally explore islands and anchorages together instead of taking turns on the kayak.

dink06

It’s also been great for carrying my photography equipment to shore. I’d never risk it on the kayak, but now I can get the camera, lenses and tripod all safely to shore to set up for great shots like this.

dink05

While we’re getting by with raising and lowering the dinghy and motor using our halyards, the next question is to davit or not to davit.

dink04

Advertisement

Does your boat have eyebrows?

I’ve never really understood having eyebrow rails on boats. Does it make them more expressive? Ours just seemed to catch dirt then get broken when people slid off the cabin top and caught their feet on them.

EyeBrow01

Within weeks of buying Gimme Shelter, a section of our starboard eyebrow rail had snapped off. Then another and another. By the time we rang in 2017, we were missing several sections of the trim on both sides of the boat.

Since O’day has been out of business for decades, there were no readily available replacement eyebrow rails. I had a discolored strip of gel coat with exposed screws sticking out that needed to be addressed.

From the beginning I knew I didn’t want to use screws to install the replacement. I looked into buying teak boards and cutting my own, but it was expensive, and I wasn’t sure how it would turn out. I looked into PlasDeck and NuTeak to see if they could replicate the originals for me, but they said they would have to make the rails wider and the plastic would require screws because an adhesive wouldn’t stick to it. I even thought about skipping the teak altogether and just putting a blue pinstripe on the cabin to cover up the stain.

It was by pure coincidence that the local boaters resale shop happened to have a set of never-installed eyebrow rails for a Catalina 34 for $99. (They’re $203 from CatalinaDirect.com.) The O’day rails were 14’4″ while the Catalina rails are only 14′, but they were pretty similar.

Eyebrow05

I removed all the screws, filled the holes with epoxy, and stuck the new eyebrow rails on with 3M emblem adhesive — the same stuff I used to replace the fixed ports.

Eyebrow04

The entire project was painless, which was such a relief after the nightmare of our heat exchanger replacement.

Eyebrow03

The only downside was that the new eyebrow rails made our hand rails and toe rails look terrible. We spent the entire next day sanding them down and oiling them to make them match.

EyeBrow02

Gimme Shelter is looking great.

Upgrading my Universal/Westerbeke Heat Exchanger: The dumbest repair I’ve ever made

This is a tale of folly and failure. My lack of research and trust in manufacturers led me down a long path of woe.

Universal5424

The Universal 5424 in our 1982 O’day 34 was overheating. The 3-cylinder diesel motor was rated to run at 2800 RPM. However, if we pushed it past 1900 RPM, the temp needle began rising and never stopped.

Decades ago, Universal/Westerbeke admitted that the 2″ diameter heat exchanger was too small for the 5424 and the M-25 and recommended upgrading to a 3″ heat exchanger. Despite our engine allegedly being rebuilt in 2008, that never happened.

At the very beginning of this debacle, a friend said I should just buy a cheap generic 3″ heat exchanger with screw-in bungs, so I could size them to my hoses and just do a quick swap. I decided against that because I wanted to keep the engine as OEM as possible with an “official” upgraded part, and I thought finding the barbed bronze bungs might be a pain. Oh, how foolish I was.

Catalina Direct had factory style replacements heat exchangers starting at $500, but I wasn’t ready to pay that much, so I searched eBay. One seller claimed he had a 3″ Universal heat exchanger. It looked very similar to the one I had. I made an offer at $150 (plus $20 shipping), and he accepted! I probably should have paid more attention to the last line in his auction that said, “measurements are not exact.”

A few days later the eBay exchanger arrived. It did look very much like the one on my boat — because it was the exact same 2″ diameter heat exchanger mounted on the back of my motor.

I contacted the eBay seller, and after a photo with a measuring tape showing that he had definitely listed this part incorrectly, he agreed to refund my money. Unfortunately, I had to spend another $20 to ship it back.

Before the project even started, I was down $40.

I browsed the Universal/Westerbeke options on Catalina Direct, and they all had the same hose inlets/outlets listed. I took that to mean they were standard sizes that would be the same as the heat exchanger I was removing. That was a terrible assumption.

heatexchanger01

Approximately $550 later, I had this 3″ x 17″ behemoth that didn’t share a single intake or outlet size with my old unit. In fact, despite being the “factory” upgrade, some of the outlets didn’t even point the correct direction.

I slowly began the process of adapting the hose sizes and directions to make it fit.

heatexchanger03

Why have four hoses and eight leak points when you can have 15 adapter pieces, nine hose sections and 63 leak points?

The worst part of it all was the 7/8″ raw water intake port. My oberdorfer pump had a 1/2″ barb and hose coming off of it. I found a 3/4″ barb, but a 3/4″ hose will not fit on the 7/8″ intake — even if you boil the hose first. There are no 7/8″ fittings available ANYWHERE.

heatexchanger02

I ended up running the 1/2″ hose to a 3/4″ adapter and then triple clamping the 7/8″ hose onto that to keep it from leaking. However, since the soft 7/8″ inlet got slightly out of round as the heat exchanger was being moved around for three weekends, the 7/8″ hose doesn’t make a perfect seal on it, and I’ve now got an ever-so-slight drip of sea water leaking into my bilge for the rest of my life.

Another $500 in adapters and hoses later, I finally had the entire coolant system put back together.

Since I had to drain all the coolant anyway, I decided to replace my thermostat.

thermostat

That was an easy process, but you have to special order the molded hose that connects the thermostat housing to the water pump. Be aware of this fact ahead of time because if you’re not, you have to put the project on hold for another week while you wait on that hose to show up.

Once I finally got it all back together, I fired up the engine, and it promptly overheated.

heatexchanger06

Yes, I had an airlock. I did not know that after filling the coolant system, you must remove the bolt in the top of the thermostat housing and then pour more coolant in there to remove the air pocket.

After overheating the engine twice dealing with the airlock, I finally got it running. We ran it in the slip long enough to verify the thermostat was opening correctly, and that she wouldn’t overheat anymore.

It took three weekends and about $1200 after the expense of the heat exchanger, hoses, adapters, clamps, thermostat, and impeller, but we can finally push into the wind at 2200 RPM without overheating.

heatexchanger04

Our last time out in that type of wind we were running at 2 – 2.5 knots. Making trips down to Galveston in a strong headwind were completely out of the question. Now we should be able to plan trips at an average speed of at least 4 knots no matter what the weather is like.

heatexchanger05

We still don’t have one of those speed demon sailboats that can motor at 6.5 knots, but four is twice as nice as two. However, if I could do this project again, I definitely wouldn’t be so freaking dumb.

Don’t be like me. Get the generic heat exchanger and screw in the barbs that fit your existing hoses. You can even get 90-degree nozzles and twist them to the exact direction required.

I’m going to apologize now to any future captain of Gimme Shelter. Projects like this are the reason people hate previous owners.

 

 

Sunday on the Bay

We tried something new last weekend. For the first time we loaded up all of Mary’s sewing stuff, and we set up a tent at the monthly Galveston Market near the strand.

SaturdayNoFunDay

Unfortunately, weather wasn’t too great, and we didn’t have much traffic. We did manage to break even on the purchase of the tent and tables and even made a few dollars to put towards our annual WordPress renewal fees, but if we were having to pay ourselves, it would be far less than minimum wage. Now there are a few more bags and business cards out there in wild, so hopefully that will spur more online business for Mary. However, I think we both decided that sitting in a tent for seven hours isn’t our thing.

Thankfully the weather cleared up Sunday, so we had a few friends join us and got off the dock for a few hours.

SundayFunday01

I have no idea what race/practice was going on, but there was a line of J boats going back and forth. It was quite interesting to see. I wish we’d been in the right place when they all turned around and popped their spinnakers. It would have made an amazing photo.

SundayFunday02

There weren’t many boats out at Redfish Island. Our buddy Tony brought his inflatable SUP and impressively paddled his way to the island against 17 knot winds.

SundayFunday03

None of the rest of us were brave enough to try it as we were all pretty sure we’d be swimming our way back to the boat.

SundayFunday04

Eventually we had to weigh anchor and head back to civilization. I envy those who can cruise with no schedule, but for now it’s back to the office for me and back to sewing bags for Mary.

2016 Icicle #3: A little bit rainy

The forecast said the thunderstorms wouldn’t start until 3 p.m., but the rain came early Saturday.

12583626_10101604716756862_656878856_n

The first leg of Icicle #3 had us close-hauled in 13 knots of wind, so we tried reefing in the jib to drop it from a 130 to a 100 to see if we could point a little higher this week. We made good speed and had a more neutral helm, but we still couldn’t point as high as most of the fleet.

It probably didn’t help that just before we started the race the slug on the back of the mainsail jumped out of the track on the boom, and we had to do some quick rigging with an extra line to tie it back down. I guess we’re going to have to put a larger slug on there.

Rigged_Sail

The wind then shifted to right off the mark during the second leg, which sent everyone tacking. I saw a couple boats choose to make about 10 short tacks instead of 3 or 4 long ones, and we caught up to a few of them.

12400760_10153869916838518_2288156096919022139_n

The last leg shifted back and forth between a broad reach and a run and got quite rainy. I wish I had a photo of all four crew members and the dog huddling under a leaky dodger.

12576123_10101604717031312_1566008282_n

Judging by the time between lightning flashes and the thunder, it was never THAT close to us, but it was still a little unnerving when it would light up the sky.

12571387_10101604716766842_1771444153_n

Based on performance in the first two races, our PHRF got shifted from 180 to 186, which moved out start time from 11:56 to 11:55. However, due to the mainsail issue we didn’t get started until 11:59. We finished at 2:16 with three boats behind us, which might be the best finish we’ve had so far. More importantly, we didn’t break anything, but we will have to work on the main. I’m also going to have to replace the halyards soon as they’re stretching and chalky, but my budget says we’re going to have to wait a few months on that.

Thank you to Brian, Matt, Shari and Tony for crewing, and special thanks to Shari for bringing kolaches and pulling her phone out in the rain to take a few photos for the blog this week.

2016 Icicle #2: A Spirited Sail

I took to the bay with a crew of 4 (5 if you count Dixie Belle) for the second race of the GBCA Icicle Series in the most intense wind Gimme Shelter has seen since we’ve owned her.

IMG_0587

We had 18 – 25 knots WNW the entire race, so it’s not a surprise that we finished almost an hour faster than last week with an end time of 1:46.

2016_Icicle2_04

Our first leg went well with the main double-reefed and our speed over ground averaging 7 knots. When we made the turn into the second leg we were still towards the front of the fleet.

2016_Icicle2_02

Daniel and Andy set to work shaking out our reef.

2016_Icicle2_01

We even set an official Gimme Shelter speed record while surfing a wave during a gust!

SpeedOverGround

However, the rest of the fleet was closing fast. The J-boats were absolutely flying.

2016_Icicle2_06

Until they weren’t …

2016_Icicle2_07

I wish I’d had a video camera running because there was some spectacular broaching going on behind us. We saw at least three boats go down.

2016_Icicle2_08

Meanwhile, our crew was suffering a bit. Dixie Belle was really tired of heeling, and one member of the crew, who shall remain nameless, spent some time feeding the fish on the third leg.

2016_Icicle2_05

Unfortunately with our shoal draft and 160 genoa, we just couldn’t point as high as the rest of the fleet on the last leg. I pinched up too much and our average speed dropped to about 4.5 knots. Then we still had to tack twice to finally cross the finish. That was bad driving on my part.

IMG_0602

But at least we finished fast enough this week that Scott Lacy was still there aboard Tramp to snap our photo. Thanks, Scott!

Of course, this wouldn’t be a real boat story without something breaking.

With the new blocks and all the cam cleats working correctly, we started paying more attention to the actual lines — and they were in bad shape.

old_jib_sheet

The outer sheath on the starboard jib sheet was completely broken, and the port sheet was almost as bad.

old_outhaul

The outhaul and reefing lines also had big problems. I had planned to spend Sunday removing the old radar tower, but instead I spent the day checking and replacing lines.

old_lines_web

By the end of the day we ended up with new jib sheets, new reefing lines, a new outhaul and a new boom vang.

new_lines_web

My time in Boy Scouts obviously paid off because 25 years later I can still whip the end of a rope.

whip_web

I just wish I knew how to splice eyes into the ends of the line. Maybe learning to splice will be a goal for 2016.

Big thanks to Daniel, Shari, Andy and Brian for crewing with me, and an extra special thank to Mary for letting us play on her boat in high winds.

 

 

That last step is a doozy: Ending 2015 with a break … and a crash

Our apologies for the lack of blogging lately.  Things. got. crazy.

We had an action-packed December planned. There was going to be a tour of a sail loft with a “how it’s made” story about our new mainsail. I was so excited to see the sail loft and try the machines.  We were going to be reporting from the Kemah Christmas Boat Parade. We were scheduled to play our first boat band bar gig. We were even trying to schedule one last dinner cruise for the winners of our the United Way silent auction. We really were going to crank it up and end the year on a high note. We were honestly so excited for all of these plans! 

Notice I said, “were.” All of our plans changed two weeks ago on a sunny Sunday afternoon when Mary was just casually stepping off of a friend’s boat. She was wearing good shoes, the deck wasn’t wet, she had nothing in her hands, and we hadn’t had a thing to drink. She just stepped down wrong, and she heard the bones in her foot crack as she collapsed onto the dock.  I sort of stepped half on-half off the side of the step. I hadn’t even made it off the dock before I blacked out from the pain. 

A quick run to the emergency room confirmed not one, but two broken bones — one in her foot and one in her ankle. It looked like our boating was done for the year.

foot1

As they say, when it rains, it pours. Just a day later she suffered another accident that totaled her car. Ironically, I was driving to the hospital to have a follow-up done on my foot. Thankfully I did not have to go to the hospital because of the crash.

I’ve spent the past two weeks trying to keep Mary as calm as possible, which is a challenge. If I leave the room for too long I’ll catch her hopping around the house working on various projects or trying to clean instead of resting and icing her leg. I think putting your wife in bed and taking away the crutches should be illegal.  I mean, I already lost my car…

The entire incident brought up a big question. What if this had happened while we were cruising? How would we have handled this if we were hours or even days away from a hospital? What kind of medications and first aid supplies should we have on board? What kind of health insurance would we need in a foreign country? The good news is last weekend we found out that I can navigate the boat on one leg without too much trouble — albeit somewhat slowly. 

Thankfully these were simple fractures. The only treatment is to splint the ankle and ice the foot while we wait for the bones to heal. In Scouts we used to practice making splints out of magazines and other random objects, so should we ever face a simple fracture in the future, I’m ready. However, if it’s a compound fracture with jagged bones sticking out of the skin, we’re probably calling the Coast Guard.

As Mary continues to recover we’re now trying to decide what kind of car to buy. Saying that our taste in vehicles differs greatly would be a mild understatement. Honestly we’re both making bad choices, but in different directions.

We want to wish everyone a merry Christmas and a happy new year. The 2016 GBCA Icicle Series begins January 2, so we’ll be kicking off the new year with lots of activity.

ChristmasPhotoWeb

Have a safe holiday, and watch that last step in 2015, it’s a doozy!

Our visit to Doug Jackson and SV Seeker in Tulsa, Oklahoma

The boat the Internet built — that’s the slogan emblazoned atop the website we’ve visited the past few months watching Doug Jackson’s progress as he continues to build SV Seeker, a 74-foot steel origami hull, junk rigged, cargo, motorsailer in his front yard.

Seeker01

Doug has come to the conclusion that the best way to realize his dream is to share it with everyone around the world. Readers from across the globe comment with their ideas and expertise, and Doug is willing to house and feed anyone who wants to make the trek to Tulsa, Oklahoma to work on Seeker.

Seeker02

As we made our way back to Houston on a cold, rainy Sunday after spending a week visiting family, we couldn’t pass up the opportunity to take a small detour to meet Doug and actually see SV Seeker for ourselves.

Seeker07

When we arrived we met Dave Fickle from Arizona who had spent the week of Thanksgiving helping Doug with wiring the ROV and welding the propeller shroud. He began welding cable guides onto the rudder quadrant while Doug took a break to give Mary and myself the grand tour.

Seeker04

After a very busy summer the pilot house and hull are mostly constructed and some of the hatches are in place.

Seeker05

The cabin is also beginning to take shape as Doug continues to leak-test his keels and tanks.

Seeker06

The pile of portals is growing. If you look back at the hull photos, you can see that Doug has drawn in their future locations.

Seeker13

The water-tight doors to be installed in Seeker’s cabin are also a sight to behold.

Seeker14

We even got to check out Doug’s dinghy design, complete with seasonal elf captain.

Seeker08

The tour was great, but no trip to visit SV Seeker would be complete without doing some work. Mary took an interest in the welding.

Seeker09

Doug was kind enough to explain to her how the welder worked and gave her a quick lesson.

Seeker10

And suddenly, Mary, who had never welded before, was attaching a cable guide to the rudder quadrant.

Seeker11

And it turns out, her welding isn’t too bad!

Seeker12

Doug said he estimates at least two more years of work before Seeker is ready to hit the water, and you’re probably wondering, how will Seeker get to the water.

Tulsa is actually an inland port city, and just 15 miles away from where Seeker sits is a shipyard on the Arkansas River where she’ll eventually be launched. Then it’s just a matter of making her way through the Oklahoma lock and dam system until eventually she’ll hit the Mississippi River and then the Gulf of Mexico.

Seeker03

We could have stayed all day, but with dogs sitting in the car and another eight hours of driving to do, we had to say goodbye and get back on the road.

Special thanks to Doug for his incredible hospitality. We hope to see you again on the water.

Make sure to visit Doug’s site at www.svseeker.com. There’s also an SV Seeker Facebook Group here: https://www.facebook.com/groups/svseeker/?fref=ts

 

The Gimme Shelter guide to chartering in the Spanish Virgin Islands

While they may sound foreign, US citizens won’t need a passport to charter in the Spanish Virgin Islands. Considered part of the commonwealth of Puerto Rico, the islands became a United States province after the Spanish-American war in 1898. However, it wouldn’t hurt to brush up on your Spanish before the trip.

PirateFlag

San Juan Luis Muñoz International Airport is more than an hour away from Marina Puerto Del Rey, but the charter companies can arrange ground transport by van for $15 per person. The vans even gave us time to provision at a grocery store before continuing on to Fajardo.

SVI_day1_05

Puerto del Rey is a sight in itself as the largest full-service marina in the Caribbean with more than 1,000 wet slips and 14 acres of dry storage. Enjoy the ship store, deli and laundry facilities, but watch out for the golf carts moving at breakneck speeds up and down the piers and give yourself plenty of time if you’re going to eat at the waterfront restaurant.

Cayo Icacos is just a short hop from Puerto Rico where you can pick up a mooring ball for a day of snorkeling or a trip to the beach. Then head to Isla Palomino for a more protected mooring to spend the night.

Batubara IslaPalominos

Palomino is owned and operated by El Conquistador, a Waldorf Astoria Resort, and they ferry guests back and forth to the beach on large catamarans from 9 a.m. – 5:30 p.m. Boaters can walk the beach and buy drinks at the resort bars, but they only accept credit cards. Many Puerto Ricans bring their own boats to Palomino for the weekend, so expect the mooring field and anchorage to be crowded and loud Friday and Saturday nights.

Vieques, populated by around 14,000 people and several hundred wild horses, provides great harbors along the west and south sides of the island. In Esperanza you’ll have to pay $25 per night for a mooring ball, but when you spot the wreckage of several other sailboats, you’ll be glad you did. The shipwrecks and constant admonitions to lock up our dinghies gave the town a strong pirate vibe. There are plenty of restaurants and gift shops within walking distance of the dinghy dock and fresh water is available although you’ll have to lug it down the road.

Facker_SVI_36SVI_day4_05

The days of swimming in “Bio Bay” are over, but you can still tour Mosquito Bay by electric pontoon boat or kayak to witness the bioluminescence of single-celled organisms called Pyrodimium bahamense. These dinoflagellates give off a bluish glow when the water is disturbed, something best witnessed during a new moon or an overcast night. Don’t count on getting any photos of this phenomenon as it would take a photo-flash followed by a long exposure, and the guides discourage the use of any devices that light up during the tour. However, you will get an intriguing look into the life of a mangrove tree and the ecosystem it supports.

La Chiva, towards the east end of Vieques, provides another protected beach for an afternoon of snorkeling. Look for the noni fruit growing along the beach among the cactus and coconut trees. Said to be a cure for everything from menstrual cramps to senility, I would not recommend eating it as it tastes like crap.

DSC00684

Culebra and Culebrita are the true gems of the commonwealth with white sandy beaches and gorgeous reefs perfect for snorkeling or diving. Keep an eye on the charts and navigate through Puerto del Manglar to pick up a mooring ball in Bahia de Almodovar. The reef creates a protected bay with an unobstructed view into the Canal Del Sur.

DSC00972 DSC00951

From there it’s just a short trip to Culebrita where you can moor in Tortuga Bay. The bay lived up to its name as we saw four green sea turtles during our afternoon there. There’s also great hiking on the island, but bring shoes as the trails are rocky and the foliage is prickly. Take a dip in the tidal pools known as The Baths or walk up to the remains of the lighthouse. Originally completed in 1886, it was the oldest operating lighthouse in the Caribbean until 1975 when the US Coast Guard finally closed the facility. Keep an eye out for goats, deer and iguanas along the trail.

DSC00993

The reef on the northwest corner of Culebrita is rumored to be the best place to catch spiny lobster. We certainly observed some there while snorkeling but never attempted to grab one.

lobster

If you’re in need of groceries, water or just a night on the town, cross back to Culebra and into Esenada Honda for a night or two. However, the bottom of the bay is covered in sea grass, so make sure you’re not dragging before you head into Dewey.

L1011594

There is a public dinghy dock near the Municipal Building, but the Dinghy Dock Restaurant also allows the docking of inflatables, has great food, and sells fresh water for 25 cents per gallon. If you stop by after dark they turn on underwater lights to reveal large tarpon cruising the edge of the restaurant waiting to finish your leftovers. Mamcita’s also received rave reviews from members of our party, there’s a grocery store up the hill, and the dive shop carries SD cards. There is anchoring available on the west side of the island, but it’s not as protected and you’ll get rolled by the ferry that runs between Culebra and Fajardo several times a day.

DSC01243

If you head north to Punta Tamarindo Grande you can pick up a mooring ball at the edge of the Culebra Nature Reserve where we found the largest reef and best snorkeling of the week. Dink ashore, and it’s a 15-minute walk across the reserve to Flamenco Beach, rated one of the top ten beaches in the world. Drinks, food, ice cream and bathrooms are available. Make sure to walk up the north end of the beach to see the abandoned military tanks that are now covered in graffiti and rusting in the sand.

DSC01648

It’s important to remember that both Vieques and Culebra were used as military bombing ranges and still have some areas off limits due to unexploded ordinance. Always pay attention to warning signs before dropping anchor, poking strange objects on the seabed, or hiking through brush.

DSC01628

The Puerto Rican Air National Guard maintains a C-130 fleet, so don’t be caught off guard if a giant grey airplane comes thundering across the sky, circles your vessel and then dips its wings towards you before barreling on into the horizon. We actually got buzzed twice in one week.

It’s illegal throughout all of the SVIs to pull your dinghy or kayaks up on the beach as this could damage turtle nests. Make sure you have enough line to tie your dink to something on shore and another line to set an anchor to keep it from washing up.

DSC01665

Catamarans are allowed to cross to St. Thomas if you want to add it to your itinerary, but monohulls require special permission from the charter company.

The Spanish Virgin Islands don’t have the same tourism infrastructure you’d find in the US or British Virgin Islands, which is what makes them special. During our seven-day charter we only had meals ashore two times. It’s easy to escape the crowds, see the stars, and enjoy the solitude of nature.

The 2015 Lakewood Yacht Club Harvest Moon Regatta

When you buy a boat in Kemah, Texas you can’t help but hear stories of certain things like Redfish Island, Double Bayou, and the Harvest Moon Regatta.

harvestmoon

It seemed like every sailor with even a little bit of salt had done the Harvest Moon at some time or another. It also seemed like a whole lot of them had suspiciously “won it” more than once.

The regatta is a three-day, two-night race from Galveston to Port Aransas. It’s been an event that I’ve wanted to participate in for years now, but it always seemed I was traveling for work or had some other major conflict.

 photo gps_tracks.jpg

This year I thought I was going to miss it again because Mary was out of vacation, and I was already taking two weeks off for a boat delivery in November. However, we had friends in need of one more crew person at the last minute, and they didn’t need me to help sail the boat back. That meant I would only miss one day of work, and Mary agreed to drive down to Port Aransas to treat herself to a spa day before meeting us at the marina for the party.

The weather is looking a little bit scary. It’s probably going to be raining sideways the entire time. This will also be my first attempt at sleeping on a boat under sail. We’ll see how that goes.

When we start Thursday you’ll be able to follow our track at http://trackleaders.com/harvest15i.php?name=HIPPOKAMPOS

One thing is certain, we’ll have plenty of wind.

OffatstoKemah11

UPDATE: Looks like I won’t be sailing in the Harvest Moon Regatta this year. We got this message from Lakewood Yacht Club a few minutes ago.

THE 2015 HARVEST MOON REGATTA® RACE SCHEDULED TO BEGIN OCTOBER 22, 2015 HAS BEEN CANCELLED.

Due to serious concerns about the safety of participants and their vessels due to hazardous weather conditions predicted by several weather authorities, Lakewood Yacht Club, as Host, and Bay Access, as Organizer, have decided to cancel the 2015 Harvest Moon Regatta® race.

Information regarding the other events scheduled to occur in Port Aransas as part of the regatta, including the Bacardi Rum Party, BBQ, and raffle events will be forthcoming.

The history and goal of the Harvest Moon Regatta® race is to promote offshore sailing in safe conditions such that the participants, whether seasoned sailing veterans or first time offshore sailors, can enjoy the race and trip down the coast with confidence and safety for all concerned. Race safety is paramount. Though it’s possible the weather could moderate during the time the race would have been held, the forecasts indicate the conditions will most likely remain such that race conditions, especially docking and vessel return conditions, will not meet the goals of the race as organized. Therefore, the 2015 Harvest Moon Regatta® race has been cancelled.