I like the warm, yellow glow of vintage halogen headlights. Unfortunately, they’re not so great for actually seeing at night. The go-to fix for the past 10 years has been High Intensity Discharge (HID) headlight conversion kits. Of course, these bulbs draw much more power than the originals, which wasn’t great for vintage wiring that was never meant to handle that sort of amp draw in the first place. The solve that issue, it required the installation of a headlight relay and some new wiring to alleviate the load. Otherwise, turning on your brights might result in a fire.

With LED technology becoming so commonplace I figured there had to be a better solution. We converted all the bulbs in our boat to LED years ago. Surprisingly, there still wasn’t a great LED solution being carried by any of the major restoration and parts shops.

Projector LEDs are by far the best option, but most of them are really funky looking. I wanted something that looked as original as possible. My search led me to a site called dapperlighting.com. They have a projector LED headlight called the OE7, which still looks like the vintage 7” glass lights used on Mustangs, but it has a projector housing inside with an LED bulb. Unfortunately, my 1967 Mercury Cougar has four 5.75” headlights.

Dapper Lighting also sells an array of 5.75” lights with various halos, colors, and even options to make them change colors and work as turn signals, etc. It’s neat tech, but it’s not what I needed at all. My headlights don’t even show unless they’re turned on, so having halos that come on with the parking lights or turn signals built into them would be a complete waste of money.

My search moved on to eBay. I found a vendor called Stark Lighting that was selling stock looking 5.75” glass bulb housing with an H4 bulb socket on the back paired with LED bulbs. It was a plug and play solution, but I was hesitant to purchase them. Being a non-projector bulb and housing, I was really worried about the glare. I can’t stand those cars on the road that put the HID bulbs in a housing that was never meant for them and blind everyone on the freeway.

After much debate and a drive home from the grocery store during which I couldn’t tell if my headlights were turned on or not, I finally decided to give them a try.

While the Stark Lighting eBay listings proudly display the Sylvania logo, there was not any sort of logo to be found on any of their packaging.

The housings are real glass, but they don’t have the same concave surface as the stock lights.

The bulbs have a large heatsink and fan on the back. I have my questions regarding the longevity of those little fans, but we’ll see.

The metal retaining rings took some finagling to seat over the H4 housings, but there were no issues with the bulbs protruding out of the back. There was plenty of clearance for everything. All four bulbs have high- and low-beam capability, so you just leave the center blade exposed when you press the connections together on the high-beam only plugs.

The result was a stock looking headlight with a very white light.

I drove the car around for a weekend with stock headlights on the driver side and LED headlights on the passenger side. There was a dramatic difference.

I could see much further down the road with the LEDs.

I was hoping that after the conversion I would be able to just change the bulbs from the rear of the housing instead of removing the entire housing, but there is a retainer clip over the bulb that can’t be opened with the housing installed in the car.

I don’t feel like these lights cause crazy glare for oncoming drivers, but I aimed them down more than what the manual specifies just in case.

Now even in a well-lit parking lot at night, I can still tell my headlights are on when I pull the switch. This has definitely been one of the best modifications I’ve made to the car.